20M MPO-4LC Duplex 10G OM4 50/125 Multimode Fiber Optic Harness Fan-out/Breakout Cable, 8 Fiber, Polarity B, Elite Female, LSZH-Magenta, Bunch, 40GBASE-SR4
We make single mode and multimode MPO fiber optic patch cables, harness, breakout,trunk, distribution,MPO-LC, MPO-ST, MPO-FC,MPO-MU,MPO-MT-RJ,MPO-E2000,etc types custom design MPO fiber optic cable assemblies, 9/125,50/125,62.5/125,SM,MM,simplex,duplex,multi cores.OS2,OS1,OM1,OM2,OM3,OM4,for 10G/40G/100G applications.
MPO-8F to 4 LC Duplex SMF Cable Direct and Interconnect Solution A simple MPO to LC breakout cable support high speed transmission in your data center.
| Connector A | MPO (Female) | Connector B | LC UPC (4) |
| Fibre Category | 50μm MM (OM4) | Fibre Count | 8 |
| Fiber Type | Duplex | Wavelength | 850nm |
| Cable Jacket | 3.0mm LSZH-Magenta | Fan-Out Diameter | 2.0mm |
| Insertion loss, max. | less than 0.35dB | Return Loss,min. | MPO more than 20dB, LC more than 30dB |
| Breakout Length | 0.5m | Durability | more than 500 times |
| Min. Bend Radius Installation | 29 mm | Min. Bend Radius Operation | 15 mm |
| Tensile strength | 400 N | Crush resistance (Reversible) | 750 N/10 cm |
| Operating Temperature | -40° to +80 | Fiber Grade | G.651 |
|
A single MPO connector on one end that breaks out into 4LC connectors Designed to save front panel space and streamline fiber management Support use in attaching directly to 40G transceivers Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard |
Data Centers with High Density Requirement Fiber Channel Storage Parallel Processing Applications Telecommunications and Backbone Installations |
The following picture is MPO-6LC Duplex harness cable for reference.
OM3 fiber vs OM4 fiber
1. OM4 fibers was made specifically for VCSEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300 Meters distance with OM3).
2. The effective modal bandwidth for OM4 is more than double that of the fiber OM3.
3. OM4 fiber optic patch cable it is 4700 MHz.km while for OM3 it is 2000 MHz.km.
| Designation | Fiber Dia.(μm) | Type | 10Gbps Ethernet 10GBASE SR/LR | 40Gbps Ethernet 40GBASE SR4/PLRL4 | 100Gbps Ethernet 100GBASE SR10/IR4X |
| OM1 | 62.5/125 | Multimode | 33 Meters (SR) | Not supported | Not supported |
| OM2 | 50/125 | Multimode | 82 Meters (SR) | Not supported | Not supported |
| OM3(Laser Optimized) | 50/125 | Multimode | 300 Meters (SR) | 100 Meters (SR4) | 100 Meters (SR10) |
| OM4(Laser Optimized) | 50/125 | Multimode | 400 Meters (SR) | 150 Meters (SR4) | 150 Meters (SR10) |
| Singlemode | 9/125 | Singlemode | 10KM at 1310nm (LR) | 1KM (PLRL4) | 2KM (IR4 PSM) |
Specialized New Zealand Fiber Optic Supplier for MTP/MPO fiber optic patch cables and devices
We supply the whole range of equipment for fiber optic networks and CATV, including: fiber optic cable (outdoor, indoor), optical transmitter (1550, 1310 nm), optical receiver (outdoor, indoor, FTTH), EDFA, Ethernet equipment (media converter, switch, transceiver, router), network accessories (CAT5, CAT5e cable, patch cord, plug, PVC boot, RJ45 module, socket, face plate, patch panel, cable tester, tool), GEPON, WDM, PLC, optical passives (optical coupler, attenuator, filter, patch cable, pigtail, adaptor, optical closure, termination box, distribution, cross cabinet), splicing (fusion splicer, tool), measuring equipment (OTDR, optical light source, optical power meter, optical fiber identifier, signal level meter), cable amplifier (outdoor, indoor), splitter, tap, attenuator, filter, isolator, wall outlet, connector,PLC Splitter, WDM, GBIC, SFP, SFP+, XFP, Xenpak, X2, Active optical cables, passive optical cables, CWDM, DWDM, OADM, QSFP, data rate from 1Gbps, 10Gbps to 40Gbps and 100Gbps.
Best New Zealand Fiber Optic MPO/MTP fiber optic patch cord Products
As a professional New Zealand fiber optic supplier for cable assemblies, Fiber Optic New Zealand is supported by a long-lasting relationship from our China factory partner. Comparing with online retailers, our price is rather competitive. We believe in "best quality and low price". Every cable and components undergoes an extensive testing and quality control procedure, ensuring each item meets global quality standards. All the fiber optic products we sell have passed Rohs and CE.Fiber Optic New Zealand offers only the highest quality products, allowing clients to buy with confidence. Our customer supports are always stand-by to answer questions. Once you’ve made a purchase, you can call us or write email to check the order or get technical support from Fiber Optic New Zealand easily. Welcome to contact us for your fiber optic requirement.
