20M MTP OM1 62.5/125 Multimode Fiber Optic Trunk Cable, 12 Fiber, Polarity B, Elite Female-Male, LSZH-Orange, Bunch, 1000BASE-SX Interconnect Solution
We make single mode and multimode MTP fiber optic patch cables, harness, breakout,trunk, distribution,MTP-LC, MTP-ST, MTP-FC,MTP-MU,MTP-MT-RJ,MTP-E2000,etc types custom design MTP fiber optic cable assemblies, 9/125,50/125,62.5/125,SM,MM,simplex,duplex,multi cores.OS2,OS1,OM1,OM2,OM3,OM4,for 10G/40G/100G applications.
| Connector | MTP to MTP | Jacket OD | 3.0 mm |
| Fiber Category | 62.5/125μm MM (OM1) | Gender | Female to Male |
| Fiber Count | 12 | Test Wavelength | 850nm |
| Insertion Loss | less than 0.35dB | Return Loss | more than 20dB |
| Polarity | Type B (Full-Flipped) | Durability | more than 500 times |
| Operating temperature | -40 to 80 | Fiber Grade | G651 |
| Flame Rating | LSZH | Outer Jacket Color | Orange |
|
Eliminate termination errors, Min installation time Each cable is 100% tested for low insertion loss and back reflection Optimized performance - Elite MTP and discrete premium connector Support 1000BASE-SX in applicable parallel optics networks Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard |
OM3 fiber vs OM4 fiber
1. OM4 fibers was made specifically for VCSEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300 Meters distance with OM3).
2. The effective modal bandwidth for OM4 is more than double that of the fiber OM3.
3. OM4 fiber optic patch cable it is 4700 MHz.km while for OM3 it is 2000 MHz.km.
| Designation | Fiber Dia.(μm) | Type | 10Gbps Ethernet 10GBASE SR/LR | 40Gbps Ethernet 40GBASE SR4/PLRL4 | 100Gbps Ethernet 100GBASE SR10/IR4 |
| OM1 | 62.5/125 | Multimode | 33 Meters (SR) | Not supported | Not supported |
| OM2 | 50/125 | Multimode | 82 Meters (SR) | Not supported | Not supported |
| OM3 (Laser Optimized) | 50/125 | Multimode | 300 Meters (SR) | 100 Meters (SR4) | 100 Meters (SR10) |
| OM4 (Laser Optimized) | 50/125 | Multimode | 400 Meters (SR) | 150 Meters (SR4) | 150 Meters (SR10) |
| Singlemode | 9/125 | Singlemode | 10KM at 1310nm (LR) | 1KM (PLRL4) | 2KM (IR4 PSM) |
We ensure the high quality of our MTP fiber optic patch cables:
1. we use High-performance polishing equipment, and complemented by precision plates holders designed for MT ferrules.
2. our 3D interferometer are used in verification of MTP polishing process, making all parameters of the polished MT ferrule complies and exceeds industry standards.
3.The flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber cores cable assemblies.
Specialized New Zealand Fiber Optic Supplier for MTP/MPO fiber optic patch cables and devices
We supply the whole range of equipment for fiber optic networks and CATV, including: fiber optic cable (outdoor, indoor), optical transmitter (1550, 1310 nm), optical receiver (outdoor, indoor, FTTH), EDFA, Ethernet equipment (media converter, switch, transceiver, router), network accessories (CAT5, CAT5e cable, patch cord, plug, PVC boot, RJ45 module, socket, face plate, patch panel, cable tester, tool), GEPON, WDM, PLC, optical passives (optical coupler, attenuator, filter, patch cable, pigtail, adaptor, optical closure, termination box, distribution, cross cabinet), splicing (fusion splicer, tool), measuring equipment (OTDR, optical light source, optical power meter, optical fiber identifier, signal level meter), cable amplifier (outdoor, indoor), splitter, tap, attenuator, filter, isolator, wall outlet, connector,PLC Splitter, WDM, GBIC, SFP, SFP+, XFP, Xenpak, X2, Active optical cables, passive optical cables, CWDM, DWDM, OADM, QSFP, data rate from 1Gbps, 10Gbps to 40Gbps and 100Gbps.
Best New Zealand Fiber Optic MPO/MTP fiber optic patch cord Products
As a professional New Zealand fiber optic supplier for cable assemblies, Fiber Optic New Zealand is supported by a long-lasting relationship from our China factory partner. Comparing with online retailers, our price is rather competitive. We believe in "best quality and low price". Every cable and components undergoes an extensive testing and quality control procedure, ensuring each item meets global quality standards. All the fiber optic products we sell have passed Rohs and CE.Fiber Optic New Zealand offers only the highest quality products, allowing clients to buy with confidence. Our customer supports are always stand-by to answer questions. Once you’ve made a purchase, you can call us or write email to check the order or get technical support from Fiber Optic New Zealand easily. Welcome to contact us for your fiber optic requirement.
