MTP-12 UPC to Unterminated Fiber PigtailMTP-12 UPC to Unterminated Fiber Pigtail, Female, 12 Fibers, OM4
This MTP® Elite Female pigtail carries 12 Fibers on OM4 50/125μm ribbon fiber, ready for mass fusion splicing inside a fiber enclosure or splice tray. Factory polished connector geometry gives you a low loss joint every time.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to Unterminated, 12 Fibers
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥27dB
- Unjacketed
- Minimum bend radius 7.5mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 12OM4-MTPU-1M-F |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | Unterminated |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | UPC |
| Fiber Count | 12 Fibers |
| Cable Jacket | Unjacketed |
| Cable Structure | Bare Ribbon Fiber |
| Glass Fiber | Bend Insensitive Fiber |
| Min. Bend Radius | 7.5mm |
| Connector Durability | 500 times |
| Tensile Strength | 80/240N (Long/Short Term) |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥27dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -60 to 85°C (-76 to 185℉) |
| Storage Temperature | -60 to 85°C (-76 to 185℉) |
Applications
Use this pigtail inside splice enclosures, ODFs and termination boxes where field cable needs factory quality connectors. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. Mass fusion splicing the ribbon completes twelve fibers in one operation.
Ribbon and Splice Details
Because the connector is polished and measured before it leaves us, the only work on site is the fusion splice itself. The pigtail fits standard splice trays and enclosures, and the ribbon format splices all fibers in a single heater cycle.
Ordering Information
To order, quote 12OM4-MTPU-1M-F together with the length and quantity you need. The 1m (3ft) version is the standard model; Private labeling, custom packaging and project specific documentation are all handled in-house.
Logistics
Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
