New Zealand Fiber Optic Supplier

You are here Transceivers 10/100BASE-T SFP

Multifiber Cables

New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. This section covers the multifiber cable product line: pre-terminated trunk assemblies for indoor and indoor/outdoor links with LC/SC/FC/ST/LSH connector options, project-specific fiber counts and project-built lengths.

For New Zealand backbone projects, examine the relevant connector polish discipline during design and keep the selected design with the as-built documentation.

All versions are built to order; state the measured span including the dressing slack inside the two panels or enclosures.

Indoor Multi-Fiber Cables

LC UPC to LC UPC Duplex OS2 OFNR 24F Indoor Breakout CableLC UPC to LC UPC Duplex OS2 OFNR 24F Indoor Breakout Cable
Factory-built 24-fiber OS2 riser (OFNR) trunk, duplex LC UPC legs both ends, stocked 2m and 10m plus custom builds.
Customized OM1/OM2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/UnterminatedCustomized OM1/OM2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM1/OM2 legacy multimode indoor trunk for installed systems, 4 to 24 fibers, custom length.
Customized OS2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/UnterminatedCustomized OS2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OS2 9/125 single-mode indoor trunk, tight-buffered 2.0/0.9mm breakout legs, 4 to 48 fibers, custom length.
Customized OS2 Indoor Multi-Fiber Bunch Cable, LC/SC/FC/ST/LSH, 0.9/2.0mm BreakoutCustomized OS2 Indoor Multi-Fiber Bunch Cable, LC/SC/FC/ST/LSH, 0.9/2.0mm Breakout
OS2 indoor bunch construction, 2 fibers with 0.9/2.0mm breakout, flexible round trunk, custom length.
Customized OS2 Indoor Multi-Fiber Flat Cable, LC/SC/FC/ST/LSH, 1.6mm BreakoutCustomized OS2 Indoor Multi-Fiber Flat Cable, LC/SC/FC/ST/LSH, 1.6mm Breakout
OS2 indoor flat construction, 2 fibers with 1.6mm breakout, low-profile trunk for shallow channels, custom length.
Customized OM5 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/UnterminatedCustomized OM5 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM5 wideband multimode indoor trunk for SWDM links, 4 to 24 fibers, custom length.
Customized OM3 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/UnterminatedCustomized OM3 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM3 multimode indoor trunk matching existing plants, 4 to 24 fibers, custom length.
Customized OM4 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/UnterminatedCustomized OM4 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM4 multimode indoor trunk for 10/25/40/100G halls, 4 to 48 fibers, custom length.

Indoor/Outdoor Multi-Fiber Cables

Customized OM3 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/UnterminatedCustomized OM3 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM3 indoor/outdoor dual-rated trunk, 2 to 24 fibers, custom length.
Customized OS2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/UnterminatedCustomized OS2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OS2 indoor/outdoor dual-rated trunk, 1 to 24 fibers, one assembly from entry point to rack, custom length.
Customized OM2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/UnterminatedCustomized OM2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM2 indoor/outdoor dual-rated trunk for legacy plants, 4 or 8 fibers, custom length.
Customized OM4 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/UnterminatedCustomized OM4 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM4 indoor/outdoor dual-rated trunk, 2 to 24 fibers, custom length.

How to Specify and Order

Each multifiber trunk is terminated with precision zirconia ferrule connectors and optically tested leg by leg for insertion loss and return loss before packing. For connector combinations, pulling eye, jacket printing, identification or project packing beyond the listed configurations, send the project requirement and the factory will cross-check the manufacturable specification with the quotation. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.

New Zealand Fiber Optics

New Zealand Fiber Optics

New Zealand Service center: New Zealand 0632, Auckland.

Factory in Asia: Shangxue Industrial Area, Shenzhen

Product Datasheets

For PDF documents of products data sheet or any general inquiry, email info@huihongfiber.com and we will send you the details.

Customer Support

For customer support, please email sales@huihongfiber.com; our Auckland service team will respond promptly.