MTP-16 to 2 x MTP-8 APC Breakout CableMTP-16 to 2 x MTP-8 APC Breakout Cable, 16 Fibers, OM4, Crossover
Factory built MTP®-16 Female APC with Offset Key breakout assembly with 16 Fibers on OM4 50/125μm fiber. The main trunk stays one cable until the fan-out point, which keeps pathways clear and makes moves and changes much easier to trace.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP®-16 Female (Non-Pinned) APC with Offset Key to MTP®-8 Female (Non-Pinned) APC, 16 Fibers
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥45dB
- Crossover polarity
- 3.0mm Plenum (OFNP) round cable
- Minimum bend radius 7.5mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 16FMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP®-16 Female (Non-Pinned) APC with Offset Key |
| Connector B | US Conec MTP®-8 Female (Non-Pinned) APC |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | APC to APC |
| Polarity | Crossover |
| Cable Jacket | Plenum (OFNP) |
| Fiber Count | 16 Fibers |
| Glass Fiber | Bend Insensitive Fiber |
| Minimum Bend Radius | 7.5mm |
| Cable Outside Diameter (OD) | 3.0mm |
| Breakout Length | 0.5m |
| Installation Tensile Load | 66N |
| Tensile Strength | 60/120N (Long/Short Term) |
| 400G Ethernet Distance | 50/100m at 850nm |
| 800G Ethernet Distance | 50m at 850nm |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥45dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
Common applications include splitting an 800G or 400G parallel port into multiple lower rate links, connecting a spine switch to several leaf switches, and fanning a trunk out to transceivers without a cassette. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes.
Breakout Geometry and Wiring
Because the breakout is made in the factory, every leg has controlled length and identical optical performance. The mapping from trunk fibers to breakout connectors follows the specified polarity, and custom mappings are available for special transceiver combinations.
Ordering Information
Ordering is simple: send us 16FMTPOM4 and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
Logistics
Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
