Customized MPO-12 Harness, 8-144F, OS2
This MPO Female/Male harness fans one multi-fiber connector out to duplex LC legs, replacing a cassette and patch cords with a single factory tested assembly. OS2 9/125μm fiber, Customized MPO-12 Harness, 8-144F, OS2, Plenum (OFNP)/LSZH jacket.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MPO Female/Male to LC/SC/FC/ST,
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Type A/Type B polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMPOXXSMF |
|---|---|
| Manufacturer | HT |
| Connector A | MPO Female/Male |
| Connector B | LC/SC/FC/ST |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to UPC/APC |
| Polarity | Type A/Type B |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Trunk Outside Diameter (OD) | 3.0-17.3mm |
| Breakout Outside Diameter (OD) | 2.0mm (Duplex), 2.0/0.9mm (Simplex) |
| Breakout Length | 0.5m |
| MTP Connector IL | ≤0.35dB |
| MTP Connector RL | ≥60dB |
| Standard Connectors IL | UPC≤0.2dB, APC≤0.3dB |
| Standard Connectors RL | UPC≥50dB, APC≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Where a cassette would normally convert MPO to LC, this harness does the same job in one piece. Fewer mated pairs means better loss budget and fewer failure points.
LC Legs and Port Mapping
Every LC duplex leg is factory polished and tested individually, with return loss well above the multimode or single mode requirement. The fan-out is compact and strain relieved, and the leg numbering matches the polarity table for error-free patching.
Ordering Information
Please reference XXMPOXXSMF in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
Quality and Testing
Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
How We Pack
Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.
