Customized MTP-12 Jumper, 8-288F, OM4
Our MTP® Elite Female/Male jumper uses OM4 50/125μm fiber and Plenum (OFNP)/LSZH/Riser (OFNR) jacket to deliver a clean, repeatable connection between patch panels, cassettes and active equipment. Customized MTP-12 Jumper, 8-288F, OM4 in one compact round cable keeps cable management simple even in dense installations.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male to MTP® Elite Female/Male,
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥27/45dB (UPC/APC)
- Plenum (OFNP)/LSZH/Riser (OFNR)
- Minimum bend radius 7.5mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | US Conec MTP® Elite Female/Male |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | UPC/APC |
| Cable Jacket | Plenum (OFNP)/LSZH/Riser (OFNR) |
| Trunk Outside Diameter (OD) | 3.0mm-23.0mm |
| Glass Fiber | Bend Insensitive Fiber |
| Connector Durability | 500 times |
| Minimum Bend Radius | 7.5mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥27/45dB (UPC/APC) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | Plenum (OFNP): -10 to 60°C (14 to 140°F)Riser (OFNR)/LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | Plenum (OFNP): -10 to 70°C (14 to 158°F)Riser (OFNR)/LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Use this jumper anywhere a short multi-fiber connection is needed: panel to equipment, cassette to cassette, or switch to switch within a row. Because it arrives polished and tested, the installer only needs to route and connect it.
Polarity and Gender Options
Choosing the right polarity is the key to a working MPO link. As a factory we build Type A, Type B and Type C versions of this cable, with male or female connectors on either end. If you are migrating an existing install, send us the current panel layout and we will confirm the correct combination before production.
Ordering Information
Please reference XXMTPOM4 in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
How We Pack
Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.
Logistics
Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.
Quality and Testing
Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.
