Customized MTP-16 Harness, 16F, OS2
One MTP® Elite Female/Male with Offset Key harness replaces a cassette, two patch cords and the loss that comes with them. OS2 9/125μm fiber and Plenum (OFNP)/LSZH jacket, built and tested end to end in our own facility.
Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male with Offset Key to LC/SC/FC/ST, 16 Fibers (Base-16)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Straight Through/Crossover polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 16FMTPXXSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male with Offset Key |
| Connector B | LC/SC/FC/ST |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to UPC/APC |
| Polarity | Straight Through/Crossover |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Trunk Outside Diameter (OD) | 3.0mm |
| Breakout Outside Diameter (OD) | 2.0mm (Duplex), 2.0/0.9mm (Simplex) |
| Fiber Count | 16 Fibers (Base-16) |
| MTP Connector IL | ≤0.35dB |
| MTP Connector RL | ≥60dB |
| Standard Connectors IL | UPC≤0.2dB, APC≤0.3dB |
| Standard Connectors RL | UPC≥50dB, APC≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Where a cassette would normally convert MPO to LC, this harness does the same job in one piece. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes. Fewer mated pairs means better loss budget and fewer failure points.
LC Legs and Port Mapping
The duplex LC legs are manufactured to a uniform breakout length and labeled in sequence, so each pair lands on the intended port. Uniboot and standard duplex LC options are available, and leg length can be adjusted for your rack layout.
Ordering Information
To order, quote 16FMTPXXSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.
How We Pack
Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.
Built to Your Spec
As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.
Logistics
Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.
