10/100BASE-T SFPLC/SC/FC/ST Variable Fiber Optic VOA In-Line Attenuator, SM/MM, 0-60dB
New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. Because LC/SC/FC/ST Variable Fiber Optic VOA In-Line Attenuator puts an adjustable attenuation element between two fiber connectors: a calibrated mechanism varies the loss across its range, one instrument covers the data that would otherwise need a drawer full of fixed attenuators. It is the standard tool for receiver sensitivity testing, optical path margin verification and power leveling during commissioning.
Product Highlights
- Applied for CWDM, DWDM, Test Equipment, CATV Systems, Point to Point Systems, etc.
- Attenuating Material-ion Doped Fiber
- Available in a Variety of Connector Types
- 1310-1550nm(SM)/850-1300nm(MM) Wavelength is free to choose
- Standard Variable Attenuation Values of 0dB up to 60dB
Specifications
| Attenuation | 0~60dB |
|---|---|
| Operating Wavelength(nm) | 1310~1550(SM)/850~1300(MM) |
| Storage Temperature Range | -40 to 85°C (-40 to 185°F) |
| Operating Temperature Range | -25 to 70°C (-13 to 158°F) |
| Application(1) | Matching Product(1) |
Why links need attenuation at all
Optical links are engineered with a power budget: the transmitter launches, the fiber and connectors consume, and the receiver expects what remains inside a defined window. Short routes, dense wavelength plans and high-power transmitters may all deliver too much light, and an overloaded receiver distorts exactly like an overloaded amplifier - errors appear on an optical path that tests perfectly on loss alone. A fixed attenuator brings the received power back inside the window, and the optical path behaves as designed.
Ion-doped fiber as the attenuating element
The cleanest way to attenuate light is to absorb it inside the fiber itself. Ion-doped fiber attenuators do exactly that: a short section of doped glass absorbs a calibrated fraction of the optical power and converts it to negligible heat. Because the attenuation happens inside the core, the light that emerges keeps its mode profile and the device adds virtually no reflectance. The alternatives - air gaps, offsets and misaligned ferrules - all trade loss against reflections and modal noise, which is why precision attenuators abandoned them. New Zealand project teams can retain this information with the as-built documentation for later review.
Variable attenuators at the test bench
The variable optical attenuator is the receiver-test instrument: start at minimum loss, increase attenuation in calibrated steps, and record the point where the optical path errors. That sweep defines the receiver sensitivity, the margin of the fitted optical path, and the headroom left for aging and repairs. A mechanical VOA covers its range with a stable, consistent mechanism and reads out on a calibrated scale - no power supply, no software, no drift between visits.
In-line VOA construction for field use
Because the in-line variable attenuator packages the adjustable element in a cable item with standard connectors, it inserts directly into the optical path under test. Single-mode and multimode versions share the matching operating principle, and the adjustment holds its setting when the instrument moves to the next mounting point. For commissioning crews who test optical path after optical path, one in-line VOA replaces a case of fixed attenuators and a bag of adapters.
Handling and cleaning attenuators
An attenuator is a connector with optics inside, and connector rules apply: keep the caps on until the moment of mating, clean each end face before insertion, and never mate a contaminated ferrule into the device - the dirt transfers to the attenuator end face and the next connector that touches it. Store spare units capped and bagged, and record which optical path every fitted unit serves so replacement orders match the original specification.
Selecting the right attenuator
Four decisions define the order: the attenuation specification must be compatible with the optical path calculation, the relevant connector product line must be compatible with the port or the patch leads, the polish grade must be compatible with the plant, and the body style - plug or inline - must suit the deployment. Fixed data cover permanent installations; the variable instruments cover testing; the test cable covers transceiver qualification. Getting all four right at order time is what turns a small component into a dependable part of the optical path.
Optical Testing and Quality Checks
Each attenuator is optically verified before packing: the attenuation specification is measured at the operating wavelengths and checked against its rated tolerance, return loss is verified to its polish grade, and the relevant connector end faces are inspected for scratches and contamination. Units ship capped and bagged.
How to Specify and Order
Refer to this attenuator by attenuation specification, connector product line, polish grade and body style when requisitioning a quotation. For data or configurations outside the listed options - non-standard dB figures, mixed connector pairings or project packing - send the requirement with the enquiry and the factory will cross-check the manufacturable specification. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.
