10/100BASE-T SFPLC UPC to LC UPC Duplex OM1 Fiber Patch Cable
New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. This OM1 fiber patch cable carries a LC UPC interface on one end and a LC UPC interface on the other, factory terminated on OM1 glass and optically tested as a full item. The duplex zipcord design keeps the transmit and receive strands paired in one item for fast, error-free patching.
Product Highlights
- Precision Zirconia Ferrule Connectors Ensure Low Loss
- Flame-Retardant Riser (OFNR) for Vertical and Floor-to-Floor Installations
- Color-Coded Cable Jacket for Easy Identification
- Duplex Zipcord Construction Reduces Risk of Damage from Crimping
- Pre-Terminated Cable Allows for Implementing Plug & Play Solutions
Specifications
| Connector A | LC UPC Duplex |
|---|---|
| Connector B | LC UPC Duplex |
| Fiber Count | 2 Fibers |
| Fiber Grade | G.651 |
| Fiber Mode | OM1 62.5/125μm |
| Wavelength | 850/1300nm |
| Flame Rating | Riser (OFNR) |
| Cable Outside Diameter (OD) | 2.0mm |
| Polarity | A (Tx) to B (Rx) |
| Cable Type | Tight-Buffered |
| Min. Bend Radius (Optical Fiber) | 15mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 1000 times |
| Tensile Strength | 90/150N (Long/Short Term) |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥30dB |
| Attenuation at 850nm | ≤3.5dB/km |
| Attenuation at 1300nm | ≤1.5dB/km |
| Operating Temperature | -10 to 70°C (14 to 158℉) |
| Storage Temperature | -20 to 70°C (-4 to 158℉) |
Matching the installed base
When a legacy optical path fails, the compatible repair is a cord that matches the fitted fiber grade. Patching OM1 with OM3 introduces a core-size transition that adds unpredictable loss; therefore, keeping a small stock of the right legacy jumpers is cheaper than fault isolation a mismatched one.
Legacy multimode for installed systems
OM1 and OM2 cabling remains in service in industrial controls, building automation and older campus networks. The supplied assembly matches that plant: the 62.5/125 or 50/125 core mates correctly with the established infrastructure, avoiding the modal mismatch that mixing core sizes would create.
Length Options
Regular length versions cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), with made-to-order length offered beyond the list. Specifying the measured channel length keeps the slack out of the manager and the strain off the connection interfaces.
Quality Control and Testing
Each optical assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. The relevant cable ships with dust caps on the two connectors and the test result offered on specify.
Ordering and Factory Support
Refer to this design by connector pair, fiber mode and length when requisitioning a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the requirement with the enquiry and the factory will cross-check the build before production is released. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.
