1.6T OSFP224 Active DAC Cable Flat Top, 1m1.6T OSFP224 Active DAC Cable Flat Top
The 1.6T OSFP224 Active DAC Cable Flat Top, 1m is a active dac (acc) direct attach copper cable with OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top), supporting 1600Gbps links over a length of 1m (3ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. It is a cost effective, low latency interconnect for 1.6T Ethernet data center and cloud network environments, and complies with OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj.
Product Highlights
- OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top)
- Data rate: 1600Gbps
- Cable type: Active DAC (ACC)
- Length: standard options (2) from 1m (3ft) to 2m (7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFPFL-1.6T-AC01 |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) |
| Max. Data Rate | 1600Gbps |
| Media | Copper |
| Cable Type | Active DAC (ACC) |
| Cable Length | 1m (3ft), 2m (7ft) |
| Jacket Material | LSZH |
| Minimum Bend Radius | 60mm |
| Wire AWG | 25AWG |
| Max. Power Consumption | 2.5W Per End |
| Modulation Format | 8x 200G-PAM4 to 8x 200G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 1.6T Ethernet |
| Protocols | OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj |
Applications
Designed for 1.6T Ethernet data center and cloud network environments, the 1.6T OSFP224 Active DAC Cable Flat Top, 1m carries 1600Gbps between OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) interfaces. This unit is manufactured in 2 standard lengths from 1m (3ft) to 2m (7ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
This product is designed and tested to comply with OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj. It plugs into any standards-based OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Part number of this model: OSFPFL-1.6T-AC. Length options are 1m (3ft) and 2m (7ft). Our factory also produces custom lengths beyond these on request. Wire gauge: 25AWG. Volume pricing is available for project quantities.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
Package
Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
