200G QSFP-DD to 8 x 25G SFP28 Passive Copper Breakout DAC Cable

For short reach 200Gbps links in 200G Ethernet, data center interconnect and 5G transport networks, the 200G QSFP-DD to 8 x 25G SFP28 Passive Copper Breakout DAC Cable offers a factory terminated passive breakout dac assembly with QSFP-DD to 8x SFP28 connectors and a length of 0.5m (2ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. The cable meets QSFP-DD MSA, SFF-8432, IEEE 802.3bs-200GAUI-8, IEEE802.3by-25GAUI, CMIS 4.0, SFF-8472.

Product Highlights

• QSFP-DD to 8x SFP28
• Data rate: 200Gbps
• Cable type: Passive Breakout DAC
• Length: 0.5m (2ft)~3m (10ft)
• DDM/DOM: Not Supported

The 200G QSFP-DD to 8 x 25G SFP28 Passive Copper Breakout DAC Cable is a 200Gbps direct attach copper cable for QSFP-DD to 8x SFP28 connections in 200G Ethernet, data center interconnect and 5G transport networks. This unit is supplied at 0.5m (2ft)~3m (10ft). One port becomes 8x SFP28, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.

Standards compliance covers QSFP-DD MSA, SFF-8432, IEEE 802.3bs-200GAUI-8, IEEE802.3by-25GAUI, CMIS 4.0, SFF-8472. The unit works in any equipment with a standard QSFP-DD to 8x SFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.

This model is supplied at 0.5m (2ft)~3m (10ft) under part number QDD-200G-8SPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG. Samples for testing can be arranged before bulk orders.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.

Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.

Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.