200G QSFP56 to 2 x 100G QSFP28 Active200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC
The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC connects QSFP56 to 2x QSFP28 ports at 200Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 200G Ethernet, data center interconnect and 5G transport networks. Cable length: Customized.
Product Highlights
- QSFP56 to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Breakout AOC
- Length: Customized
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-2Q4xNAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | Customized |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 5.5W (QSFP56 End) 5.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| Modulation (Electrical) | QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ |
| Modulation (Optical) | QSFP56-4x 50G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | Yes |
| Protocols | IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636 |
Applications
The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC connects QSFP56 to 2x QSFP28 ports at 200Gbps in 200G Ethernet, data center interconnect and 5G transport networks. Ordered in customized lengths, it matches the actual rack geometry without slack. By fanning one port out to 2x QSFP28, it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636. The unit works in any equipment with a standard QSFP56 to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2Q4xNAOxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Volume pricing is available for project quantities.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.
