SFP-25G-AO01-I1m (3ft) Brocade SFP-25G-AO01-I Compatible 25G SFP28 Industrial Active Optical Cable
This page covers one precise cable-schedule item: Brocade SFP-25G-AO01-I in 1m (3ft), supporting 25G operation through SFP28. The complete AOC assembly is identified separately from other lengths and includes verified specifications, change-control-friendly ordering details and live-link factory checks.
OEM Part Number: SFP-25G-AO01-IHT Part Number: SFP-25G-AO01-I
Product Highlights
- 25G AOC direct-attach assembly
- Exact cable length: 1m (3ft)
- SFP28 interface configuration
- 850nm optical interface
- OM3 cable media
- Prepared for hosts requiring Brocade SFP-25G-AO01-I
Specifications
| Part Number | SFP-25G-AO01-I |
|---|---|
| Form Factor | SFP28 |
| Max Data Rate | 25.78125Gbps |
| Wavelength | 850nm |
| Cable Type | OM3 |
| Minimum Bend Radius | 30mm |
| Cable Length | 1m(3ft) |
| Power Consumption | < 1W |
| Jacket Material | OFNP |
| Industrial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Protocols | SFP28 MSA，IEEE 802.3by 25GBASE-SR |
| OEM Part Number | SFP-25G-AO01-I |
| Host Compatibility | Brocade |
| Manufacturer | HT |
Exact Length and Product Identity
This product page covers SFP-25G-AO01-I in 1m (3ft). The OEM reference, physical length and HT factory configuration should remain together on the purchase order and receiving record. Other reaches or compatibility identities must be selected and verified separately rather than assumed to be interchangeable.
Structured Pathways and Serviceability
Treat the direct-attach assembly as part of the permanent pathway plan even when the link is expected to be temporary. Follow the intended horizontal and vertical managers, maintain the specified bend radius and leave service access around both ports. A small, supported service allowance is preferable to excess slack concealed inside a rack or placed under cable-tie pressure.
Cable Construction and Installation Planning
This 1m (3ft) active optical assembly integrates the cable and optical engines, so no separate transceivers or patch leads are required. The stated OM3 construction and 850nm optics must be matched at both hosts. Route the assembly without pulling on either connector and observe the listed bend limit throughout the managed path.
Brocade Compatibility and Factory Testing
Verification covers the physical connectors, expected host identity and an operating link with available diagnostic indications. We distinguish this complete check from a simple continuity test. Platform model and software release can be reviewed in advance where the installation has strict documentation or change-control requirements. Factory acceptance includes connector inspection, host identification, optical receive activity and an operating link. Both ends remain attached to the cable; they are not interchangeable standalone modules.
Quality Assurance and Packaging
After connector inspection and link verification, the assembly is coiled without tight bends and packed with end protection. Labels can cross-reference the customer cable schedule, OEM part number and length. This supports both receiving checks and later moves, adds or changes.
Ordering Information
Include the part number, fixed length, quantity and required pathway or rack grouping in the order information. The host model and firmware release are useful for change-controlled deployments. Different lengths should remain separate order lines so delivered labels and packing records agree with the pathway plan. This page describes SFP-25G-AO01-I in 1m (3ft); quote this exact reference and length together with quantity and the intended host platform.
Shipping and Lead Time
Available stock is generally dispatched within one to three working days after order confirmation, with production lead times advised for larger quantities. Delivery can be arranged by courier, air freight or sea freight, and goods may instead be handed to an appointed forwarder or shipped on the customer’s courier account.
