10/100BASE-T SFPNetgear C21 DWDM-SFP10G-60.61-I Compatible 10G SFP+ Transceiver Module 80km on OS2
The C21 DWDM-SFP10G-60.61-I compatible module serves equipment requiring a 10G SFP+ interface with 1560.61nm optics and a 80km on OS2 rating. Connection is through Duplex LC/UPC. Product data, application guidance and factory verification are presented together to support structured fiber installations preserve a documented and serviceable optical channel.
OEM Part Number: C21 DWDM-SFP10G-60.61-IHT Part Number: DW-SFP10G80-21-I
Product Highlights
- Compatible alternative to Netgear C21 DWDM-SFP10G-60.61-I
- 10G connectivity at 11.3Gbps
- Optical wavelength: 1560.61nm
- Specified reach: 80km on OS2
- Duplex LC/UPC / SMF interface
- Digital diagnostic monitoring: Supported
- Operating temperature: -40 to 85°C (-40 to 185°F)
Specifications
| NETGEAR Genuine | DWDM-SFP10G-60.61-I |
|---|---|
| Manufacturer | HT |
| HT Part Number | DW-SFP10G80-21-I |
| Form Factor | SFP+ |
| Max. Data Rate | 11.3Gbps |
| Wavelength | 1560.61nm |
| Max. Cable Distance | 80km@OS2 |
| Connector | Duplex LC/UPC |
| Media | SMF |
| Transmitter Type | EML DWDM |
| Receiver Type | APD |
| TX Power | -1~5dBm |
| Minimum Receiver Power | -23dBm |
| Power Budget | 22dB |
| Receiver Overload | -6dBm |
| Max. Power Consumption | 2W |
| Extinction Ratio | >6dB |
| DDM/DOM | Supported |
| Industrial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Bit Error Ratio (BER) | 1E-12 |
| MTBF | 1,000,000 Hours |
| Protocols | 10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472 |
Applications and Optical Link Design
Use this module for equipment interconnection over the specified single-mode fiber plant, including enterprise backbone, campus, metro or data-center interconnect links according to its rated distance. Confirm that both ends use the same optical standard and wavelength plan, and allow for connector, splice and patch-panel loss within the stated power budget.
The industrial temperature rating makes this version appropriate for controlled outdoor cabinets, transport nodes and other installations exposed to wider ambient temperature variation. Adequate airflow, protected cable routing and host-platform temperature limits still apply.
For this 1560.61nm interface, verify channel spacing and filter compatibility. Passive filters add loss even without active equipment, so assess 80km on OS2 using the complete channel rather than fiber distance alone.
Netgear Compatibility and Factory Testing
The module is checked for host recognition as C21 DWDM-SFP10G-60.61-I, link establishment and diagnostic reporting. Physical cage fit alone is not treated as evidence of compatibility. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is -1~5dBm; the stated optical power budget is 22dB. During commissioning, record the host diagnostic readings after the link has stabilized and compare them with those limits. DOM values are useful operational indicators, but they do not replace calibrated optical measurements when a link is marginal. Investigate unexpected loss through connector inspection, cleaning and a channel measurement before replacing the module. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Structured Fiber Pathways and Serviceability
Treat the transceiver as part of the complete channel. Follow the intended patch-panel route, maintain bend control and leave service access around the port. Confirm connector polish and fiber type at every mated pair; a documented service allowance is preferable to excess slack concealed inside a rack. For this model, the principal parameters are data rate 11.3Gbps, wavelength 1560.61nm, rated reach 80km on OS2.
Ordering Information
Quote HT part number DW-SFP10G80-21-I together with OEM reference C21 DWDM-SFP10G-60.61-I and quantity. Add the host model and software release when pre-order verification is required. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.
Quality Assurance and Packaging
Each C21 DWDM-SFP10G-60.61-I compatible module is inspected, powered up and functionally checked before protective packing. Dust caps and individual trays shield the interface during transport. Customer references, rack groups and project packing lists can be added for volume orders.
Frequently Asked Questions
Is this an original Netgear transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies C21 DWDM-SFP10G-60.61-I, not an original Netgear-branded module.
Which fiber and connector are required?
Use Duplex LC/UPC with SMF. The specified maximum reach is 80km on OS2, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
