Customized MPO-8 Jumper, 64-256F, Type BCustomized MPO-8 Jumper, 64-256F, Type B, OM4
Our MPO Female jumper uses OM4 50/125μm fiber and Plenum (OFNP)/Dual Rated (OFNR/LSZH) jacket to deliver a clean, repeatable connection between patch panels, cassettes and active equipment. 64/128/256 Fibers (Base-8) in one compact round cable keeps cable management simple even in dense installations.
Available lengths are 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MPO Female (Non-Pinned) to MPO Female (Non-Pinned), 64/128/256 Fibers (Base-8)
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥45dB
- Type B polarity
- Plenum (OFNP)/Dual Rated (OFNR/LSZH)
- Minimum bend radius 7.5mm
- Stock lengths from 5m (16ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMPOOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | MPO Female (Non-Pinned) |
| Connector B | MPO Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 64/128/256 Fibers (Base-8) |
| Polarity | Type B |
| Cable Jacket | Plenum (OFNP)/Dual Rated (OFNR/LSZH) |
| Trunk Outside Diameter (OD) | 12.0-23.0mm |
| Breakout Outside Diameter (OD) | 3.0mm |
| Breakout Length | 2m |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Cable Color | Magenta |
| Braided Tubing Color | Black |
| Connector Durability | 500 times |
| Tensile Strength | 80/240N (Long/Short Term) |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥45dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
Typical applications for this jumper include patching between MPO cassettes and transceivers, connecting patch panels inside a cabinet, and structured links between adjacent racks. The 64/128/256 Fibers (Base-8) construction concentrates the equivalent of many duplex jumpers into a single assembly, which is exactly what high density spine and leaf cabling needs. Type controlled factory wiring keeps the polarity scheme consistent with the rest of your cabling system.
Polarity and Gender Options
Choosing the right polarity is the key to a working MPO link. As a factory we build Type A, Type B and Type C versions of this cable, with male or female connectors on either end. If you are migrating an existing install, send us the current panel layout and we will confirm the correct combination before production.
Ordering Information
Ordering is simple: send us XXMPOOM4 and your required lengths and quantities, and we return a factory quote the same working day. Small trial orders are welcome before you commit to a full project rollout.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.
How We Pack
Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.
