MMC-12/24 Connector One-Push Fiber OpticMMC-12/24 Connector One-Push Fiber Optic Cleaner
New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. This one-push cleaner is specified for MMC-12 and MMC-24 connector end faces, covering UPC, APC and PC polish types. The disposable push-style tool advances dry cleaning material with every operation and is rated for at least 525 uses. It supports routine ferrule service work for multi-fiber panels, cable assemblies and test setups without liquid cleaner or replacement cartridges.
Product Highlights
- Cleaner Brand: US Conec IBC™
- Style: Push Style Port Cleaner
- Connector Type: MMC-12/24
- Polish Type: PC/UPC/APC
- Number of times: ≥ 525 times
- Use Type: Disposable
Specifications
| Part Number | 25802 |
|---|---|
| Manufacturer | HT |
| Cleaner Brand | US Conec IBC™ |
| Style | Push Style Port Cleaner |
| Connector Type | MMC-12/24 |
| Polish Type | PC/UPC/APC |
| Number of times | ≥ 525 times |
| Use Type | Disposable |
One tool for MMC-12 and MMC-24 interfaces
The relevant cleaner addresses the specified MMC-12/24 connector formats, not the MMC-16 configuration covered by the individual tool. Cross-check the relevant connector configuration before use, especially in a panel containing multiple MMC variants. Suitable cleaning removes dust and light contamination that may raise insertion loss or damage ferrules when connectors are mated under pressure.
Cleaning before inspection and mating
Align the relevant cleaner squarely with the port or connector and full one firm push cycle. Then review the end face rather than assuming it is clean. If contamination remains, adhere to the relevant equipment-compatible cleaning practice and avoid improvising with unapproved swabs or solvents. Clean the mating connector as well, or debris may transfer back to the first ferrule.
Maintaining a reliable field tool
Keep the cap fitted during storage and replace the disposable unit after its rated uses. Take care never to disassemble the advance mechanism or use the relevant tool on live optical interfaces. Field staff ought to disable sources, review with a suitable microscope and dust-cap clean connectors until they are ready to be mated.
Ordering and Factory Support
Use part number 25802 for the MMC-12/24 cleaner and record quantity. If your toolkit additionally services MMC-16 connectors, submit the individual MMC-16 cleaner in the order and label the two tools for quick identification. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.
