MMC Fiber Connectivity
New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. MMC fiber connectivity combines Very Small Form Factor multi-fiber connectors with factory-finished cable assemblies and high-density passive hardware. This range covers the full passive optical route: hardware and panel jumpers, direct fan-outs, made-to-order backbones, MMC-to-LC harnesses, mating adapters, rack panels, diagnostic loopbacks and connector cleaners.
Build the channel from the interface outward
Begin with the active hardware and panel interfaces, recording polish, polarity, connector product line, gender, guide pins and fiber count. Then establish jumpers, breakouts or harnesses that maintain that assignment. While MMC-to-LC harnesses expose duplex legs; neither should be chosen solely by cable appearance, mMC-to-MTP products connect separate form factors.
Use the six categories to narrow the selection
Jumpers handle direct multi-fiber patching. Breakouts divide MMC-16 into two MTP-8 legs or MMC-24 into three. Trunks provide made-to-order OS2 backbone capacity, and harnesses create eight LC duplex optical routes. Adapters and panels organize mating positions; at the same time, loopbacks and cleaners support testing and service work.
Accuracy and maintenance determine long-term results
Match OM4 or OS2 to the optics, submit all mated pairs in the loss calculation and keep branch and sub-unit tags consistent with the port schedule. During physical installation, control bend radius, support fan-outs and review each ferrule. Project-built lengths and tags are helpful only when the underlying optical design is compatible.
Ordering and Factory Support
Factory design for this section can cover project lengths, fiber maps, connector interfaces, polarity, panel tags and documentation for the selected MMC products. Provide quantities and the intended deployment or test plan with the order. Standard and made-to-order products should be checked against the specification list on arrival, with tags and design records retained for service work. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.
MMC Breakout Cables
MMC-16 APC to 2 x MTP-8 APC Breakout Cable, 16 Fibers, OS2MMC Female to MTP® Female, OS2 9/125μm, 16 Fibers.
MMC-16 APC to 2 x MTP-8 UPC Breakout Cable, 16 Fibers, OM4MMC Female to MTP® Female, OM4 50/125μm, 16 Fibers.
MMC-16 APC to 2 x MTP-8 APC Breakout Cable, 16 Fibers, OM4MMC Female to MTP® Female, OM4 50/125μm, 16 Fibers.
MMC-24 APC to 3 x MTP-8 APC Breakout Cable, 24 Fibers, OS2MMC Female to MTP® Female, OS2 9/125μm, 24 Fibers.
MMC Harness Cables
MMC-16 APC to 8 x LC UPC Harness Cable, 16 Fibers, OS2MMC Female to LC UPC Duplex, OS2 9/125μm, 16 Fibers.
MMC-16 APC to 8 x LC UPC Harness Cable, 16 Fibers, OM4MMC Female to LC UPC Duplex, OM4 50/125μm, 16 Fibers.
MMC Adapters and Panels
MMC to MMC 1-Port Fiber Optic Adapter/Coupler without FlangeConnector Type: MMC-MMC; Body Style: 1-Port; Color: Green.
MMC to MMC 2-Port Fiber Optic Adapter/Coupler without FlangeConnector Type: MMC-MMC; Body Style: 2-Port; Color: Green.
MMC to MMC 4-Port Fiber Optic Adapter/Coupler without FlangeConnector Type: MMC-MMC; Body Style: 4-Port; Color: Green.
MMC Loopbacks and Cleaners
16 Fibers MMC Female Type 1 Fiber Loopback Module, OS2Fiber Type: OS2 9/125μm; Fiber Connector: MMC Female, APC; Glass Fiber: G.657.A2.
16 Fibers MMC Female Type 1 Fiber Loopback Module, OM4Fiber Type: OM4 50/125μm; Fiber Connector: MMC Female, APC; Glass Fiber: G.657.A2.
24 Fibers MMC Female Type 1 Fiber Loopback Module, OS2Fiber Type: OS2 9/125μm; Fiber Connector: MMC Female, APC; Glass Fiber: G.657.A2.
24 Fibers MMC Female Type 1 Fiber Loopback Module, OM4Fiber Type: OM4 Multimode; Fiber Connector: MMC Female, APC; Glass Fiber: G.657.A2.
