100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC, 1m (3ft)100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC
The 100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC, 1m (3ft) connects QSFP28 to 2x QSFP28 ports at 100Gbps over OM3 multimode breakout fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 100G Ethernet, data center interconnect and 5G transport networks. The standard lineup covers lengths from 1m (3ft) to 100m (328ft).
Product Highlights
- QSFP28 to 2x QSFP28
- Data rate: 100Gbps
- Cable type: OM3 multimode breakout
- Length: standard options (10) from 1m (3ft) to 100m (328ft)
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-100G-2QAOxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 to 2x QSFP28 |
| Max. Data Rate | 100Gbps |
| Cable Length | 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 20m (66ft), 30m (98ft), 50m (164ft), 70m (230ft), 100m (328ft) |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 2.2W (100G Per End)1.5W (50G Per End) |
| Modulation Format | 4x 25G-NRZ to 2x 25G-NRZ |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Jacket Material | OFNP |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP28 Electrical MSA, SFF-8636, SFF-8665 |
Applications
The 100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC, 1m (3ft) connects QSFP28 to 2x QSFP28 ports at 100Gbps in 100G Ethernet, data center interconnect and 5G transport networks. This unit is manufactured in 10 standard lengths from 1m (3ft) to 100m (328ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 4x 25G-NRZ to 2x 25G-NRZ modulation, which keeps it aligned with current 100G switch silicon.
Standards and Compatibility
Standards compliance covers QSFP28 Electrical MSA, SFF-8636, SFF-8665. The unit works in any equipment with a standard QSFP28 to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
The part number is length dependent, such as QSFP-100G-2QAO01 for the shortest option. Length options are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 20m (66ft), 30m (98ft), 50m (164ft), 70m (230ft) and 100m (328ft). Our factory also produces custom lengths beyond these on request. Volume pricing is available for project quantities.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
