40G QSFP+ QSFP-40G-PLRL4 2km 1310nm40G QSFP+ QSFP-40G-PLRL4 2km 1310nm MPO-12/APC Module, Cisco
The 40G QSFP+ QSFP-40G-PLRL4 2km 1310nm MPO-12/APC Module, Cisco is a QSFP+ optical transceiver delivering 41.2Gbps (4x 10.3Gbps) over SMF. Operating at 1310nm with a MTP/MPO-12 Male interface, it reaches 2km and is compliant with 100G PSM4 MSA. Built-in digital diagnostics give real-time access to operating parameters, making the module easy to deploy and maintain in 40G Ethernet data center and enterprise network environments.
Product Highlights
- QSFP+ form factor, 41.2Gbps (4x 10.3Gbps) data rate
- Wavelength: 1310nm
- Connector: MTP/MPO-12 Male
- Reach: up to 2km
- Fiber media: SMF
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Cisco Compatible | QSFP-40G-PLRL4 |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP+ |
| Max. Data Rate | 41.2Gbps (4x 10.3Gbps) |
| Wavelength | 1310nm |
| Max. Transmission Distance | 2km |
| Connector | MTP/MPO-12 Male |
| Media | SMF |
| Transimitter Type | DFB CWDM |
| Receiver Type | PIN |
| TX Power | -9.4~0.5dBm |
| Receiver Sensitivity | <-14.4dBm |
| Power Budget | 5dB |
| Receiver Overload | 0.5dBm |
| Max. Power Consumption | ≤2.5W |
| Extinction Ratio | >3.5dB |
| Host FEC | Supported |
| Bit Error Ratio (BER) | 1E-12 |
| Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocols | 100G PSM4 MSA |
Applications
Network architects choose the 40G QSFP+ QSFP-40G-PLRL4 2km 1310nm MPO-12/APC Module, Cisco for 40G Ethernet data center and enterprise network environments: it runs 41.2Gbps (4x 10.3Gbps) over SMF and reaches 2km. Digital diagnostics report transmit power, receive power and temperature in real time, which simplifies commissioning and ongoing maintenance. It is interoperable with Cisco platforms and replaces the Cisco part QSFP-40G-PLRL4 directly.
Standards and Compatibility
Compliance: 100G PSM4 MSA. For projects standardized on Cisco hardware, this product replaces the QSFP-40G-PLRL4 directly, with identical fit and function. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is QSFP-PLR4L-40G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
