MMC-24 APC to 3 x MTP-8 APC BreakoutMMC-24 APC to 3 x MTP-8 APC Breakout Cable, 24 Fibers, OM4
New Zealand engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. The APC-to-APC configuration of the 24FMMCMTPOM4 breakout carries 24 OM4 fibers from one MMC APC female connector to three MTP-8 APC Elite female legs. All joint points use APC polish, and the relevant fan-out follows factory harness polarity. It provides three eight-fiber multimode optical routes in one compact, factory-finished item.
Product Highlights
- MMC Female to MTP® Female, 24 Fibers
- OM4 50/125μm, bend-insensitive fiber
- MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
- Harness Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 24FMMCMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 24 Fibers |
| Polarity | Harness Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥40/45dB (MMC/MTP®) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
A three-way fan-out with uniform polish
The relevant cable is suitable when the two the MMC infrastructure and all three MTP destinations are specified for APC. The connection interfaces are female and non-pinned; therefore, pinned mates are intended throughout. ensure that the application truly calls for three eight-fiber branches and that no added polarity reversal is introduced by the connected trunk or cassette before implementation.
Loss values for the complete optical path
This manufactured assembly is rated at 0.35dB maximum insertion loss, with at least 40dB return loss at MMC and 45dB at MTP APC. Use these connector-specific data when reviewing the passive optical path. OM4 behavior at 850/1300nm supports multimode systems, but allowable distance and complete joint count remain properties of the full transceiver optical path.
Installing and identifying three APC branches
Regular length versions are 1m (3ft), 2m (7ft) and 3m (10ft), with project-built lengths in feet or meters. Because three alike MTP connectors leave one fan-out, branch tags are particularly valuable. Retain gentle routing around the breakout body, review each ferrule and cap any branch that is not equivalent to connected immediately.
Ordering and Factory Support
Record 24FMMCMTPOM4 in the APC-to-APC three-leg design, with length and quantity. If the three branches terminate in separate rack locations, provide the intended leg arrangement and identification rather than relying on a standard fan-out layout. New Zealand project orders can include documentation and labeling requirements alongside the technical configuration.
